also: you can calculate the carnot cycle efficiency of a solar cell as if it was a classical heat-power-machine, even though it has no visible moving parts.
the reason why this works and yields realistic results is because the basic principles of thermodynamics stay the same no matter if you are working with steam, combustion gasses or photons and electron gas inside a semiconductor.
vasistas
https://en.wiktionary.org/wiki/vasistas
its real, though not necessarily the type of window that you described. also exists in Turkish. i have a Turkish colleague who was very proud to explain the origin of that word to us in Germany :D .
this is extra tricky because they did not specify the exact kernel. mainline could be any of the kernels tagged as stable that you can build from linus’ git tree. i know that in the past you could run a mainline linux on intel 368 chips but today you probably can not because official support was dropped a while ago.
datasheet for one of the drive models apparently these have a dual SAS interface, so what you are seing could be completely normal. i dont have any experience with this type of setup though.
btw you can uniquely identify partitions by using something like lsblk -o+PARTUUID,FSTYPE the partuuid should never repeat in the output even if the partition table was somehow used as a template (though "dd"ing from disk to disk will duplicate those of course)
also check out the “SERIAL” column for lsblk to uniquely identify the drives themselves.
could you run something like sudo lsblk -o+MODEL and note down the model for the drives? i kind of suspect that the HBA you are using is still doing some abstraction and is not in IT mode. the duplication could come from connecting two SAS cables to the same backplane, thus creating a sort of double image of the enclosure. this is usually handled and hidden by the HBA though if it is configured correctly.
pls also check that you are in fact using the correct ports on the enclosure. if you are not building a SAN only the “A” ports are supposed to be used and the “B” ports should be unused/free.
just a bunch of individuals drives
that is literally what JBOD means so congratulations you already have one. a classical RAID would show up as a single drive.
Initiator-target (IT) mode enables creating a JBOD with zfs vdevs on it. You can have the zfs vdevs in raidz configuration (which would give you the same drive redundancy as a hardware raid, with raidz1 performing similar to RAID5)
zfs is commonly used with a JBOD configuration on a raid controller but you can also use any other kind of controller as long as the individual drives can be written to. examples for this would be NVMe drives directly attached to the PCIe bus or normal SATA controllers. This is more a performance optimization than an issue with compatibility.
the infuriating thing is that according to the books he is a pretty unique mix of … checking … ”the only child in a family co-op of five fathers and three mothers“
they could have done almost anything with the character in terms of appearance and chose this sigh
deleted by creator
Will it also allow the placement of entities to be parametrically changed? like the changing the position or enabling/disabling the placement of specific entities?
OpenWRT does not use liblzma or systemd so i think that one is pretty safe. I would also be surprised if Android included OpenSSH server binaries in that way.