Hey everyone,

Just wanted to share my recent experience with gaming on my laptop. While playing CS:GO was manageable, CS2 was a different story. My laptop kept hitting thermal limits, causing frustrating performance drops. So, I decided to do it myself and repaste it.

I wrote a simple script to monitor my temperatures and frequencies: thermalog script.

The results speak for themselves: thermalog results.

I wasn’t even near to thermal limit even when I played in 2K instead of FHD.

I used Arctic MX-6. (I bought liquid metal also as a backup plan, but luckily I don’t need it). I’m more than happy with the results.

My laptop is four years old, I highly recommend giving it a go if you’re facing similar thermal issues.

Happy gaming!

  • FuckyWucky [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    7
    ·
    4 months ago

    be careful, if its paste ive seen it leaking out causing parts of the die to not make proper contact eventually killing the CPU/GPU.

    i would suggest getting PTM7950 pads, these don’t pump out.

    • Grass@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      4 months ago

      I put ptm in my steam deck and the numbers are better and the heat coming out of the vent now is kinda scary but that means it’s not on the apu I guess. Next is the extra heat pipes mod and also ptm pad for my ancient laptop. It already had a repaste and the exhaust increase is also pretty impressive with just that.

    • Shawdow194@kbin.social
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      I’ve always used paste- never heard of these. I’ll totally check them out! I assume they are fine for any CPU/GPU applications as long as they fit? I always lose my paste tubes so having a sheet of these might be easier to keep track of

    • itsmect@monero.town
      link
      fedilink
      arrow-up
      2
      ·
      4 months ago

      Do not use “paste” that already has a low viscosity at room temp, it will get more liquid as it heats up. Good thermal paste doesn’t even cost much, and a syringe last for years of regular service on multiple devices. Repasting is not difficult.

      • Lojcs@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        4 months ago

        The problem described is not the paste getting outside, it’s not enough staying inside.

    • electricprism@lemmy.ml
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      4 months ago

      Lifehack: Grab any 1970s 1 cent pure copper penny if you are worried about leakage and have the clearance and use that instead. It’s nonsense but hilarious. Memory is hazy but I’ve seen significant gains from this in the past.

      Also it’s 10,000 - 100,000 times cheaper as a bonus.